There are distinct advantages to the use of modular elevators for parking structures. This is especially true when adding the MEM Elevator System to you next project. Conversely, adding a conventional elevator to a new or existing parking facility can cost hundreds of thousands of dollars. Beyond that the process can take months. The MEM Elevator System is an architectural solution, which effectively deals with these issues, saving you time and money. Those are distinct advantages of the modular elevator and set us apart from other alternatives.
The MEM Elevator System, is a prefabricated the hoistway which is manufactured off-site in a remote location. This allows the modular elevator to be manufactured in the plant simultaneously to the construction of the parking structure.
Unlike conventional elevators, modular elevators don’t need to be an inherent part of the parking structure they are servicing. Instead, they are easily attached to the existing structure. This often is on the exterior of the building without having to share the same foundation.
For an existing parking structure that is adding floors and needs a vertical transportation system, a modular elevator is the ideal solution. It extends the life of the parking facility when adding a modular elevator. You will lose no square footage – all while ensuring accessibility for everyone.
Also, placing the modular elevator on-site before the parking facility is fully built is possible. It can even can be used as the construction elevator – as long as power is available.
See, regulators typically require a temporary construction lift for projects over three stories. The alternative is an elevator to be installed at a job site. A permanent modular elevator can be used to meet these requirements. It then eliminates the need to rent and expense a temporary lift. That in itself demonstrates distinct advantages of the modular elevator.
Additionally, modular construction offers shorter build times; typically 50 to 60 percent less than a traditional on-site construction project. A modular elevator can be up and running before a conventional hoistway is built. This provides an earlier return on investment and lower professional fees.
The two most common vertical transportation solutions used in parking facilities are hydraulic and traction machine roomless (MRL) elevators. Both are available full-sized for commercial use and both are equal in performance and quality.
Hydraulic has the advantage of being easier to install and maintain. This makes them a less expensive choice in the long run. As a result hydro elevators are the recommendation we most often make. They are in use in parking structures between two-to-five stories and are available with holeless-twin or in-ground jacks. Holeless hydraulic elevators use above-ground cylinders and are used in sustainable or cost-sensitive projects with two to three floors. With the holeless elevators you can eliminate the unknowns related to drilling for in-ground jacks.
The in-ground hydraulic system can easily accommodate five stories or even higher. It provides a smooth ride and lower maintenance costs overall.
The traction MRL is an option, that offers little more than the hydraulic units. It is marginally faster (literally seconds) and can achieve higher total travel. However, the additional speed comes with a cost of higher maintenance fees.
It is important for the contractor to work closely with the modular elevator manufacturer. They should be involved when planning and installing a modular elevator for a successful installation. Logistics and timing play an important role in maximizing the financial opportunities that modular elevators afford. The MEM team offers support, coordination and communication in the process.
The first step in the installation process is pouring the concrete elevator pit. The anchor bolt template from MEM is useful for precise positioning. Second, once the elevator is set in place, it is attached to the anchor bolts and verified to be plumb. You now have a fully installed elevator.
Next, the fully-assembled modular equipment room is set into place. This installation process is usually completed by lunch time. No kidding.
After the elevator is set, electrical, fire and phone services are provided and final adjustments are completed. Upon inspection and approval by the appropriate jurisdictions, the elevator is ready for use in a matter of days.
As you can see modular elevators offer many benefits over conventional elevators. For all low and mid-rise applications in new and retrofit construction we are the preferred solution.
Lastly, we can customize the ready-to-use MEM Elevator System. In that way we can meet the needs of any project. And the end results are indistinguishable from conventional construction. They are also available with vandal resistant features because we all know a parking garage elevator needs to be tough. One thing for sure there are distinct advantages of the modular elevator for the parking industry.
We hope we have laid out a good argument for the advantages of the modular elevator for parking structures. So if you have any interest contact us at any time. We will help you think though potential uses. If you have a project in mind, click the Fast Track button below. You will be provided a thumbnail number and receive additional information. If you would like to see how we create the elevator, you can register for a Live Virtual Tour. Or come visit our factory in person. We would love to show off a bit.
You learn a lot by listening. Like mom always said, we have two ears and just one mouth for a reason. So, last week at the World of Modular conference held by the Modular Building Institute we got a chance to listen.
We found out what people were thinking when it came to elevators from their perspective. How does the architect, engineer, project manager, owner or designer really feel about elevators and the elevator industry? And especially what do they think of modular elevators.
Well let’s be blunt, we did not hear many positive things about the elevator business as a whole. Some folks actually joked we were the most hated industry at the conference! Wow tough crowd. But I can see why.
See in simplest terms people in the construction industry know an elevator is just a box moving up and down inside another box. You have a cab, a hoistway or shaft, doors, a control system and a means of conveyance. Pretty simple. But, when it comes to making all of the intricate pieces of the puzzle to work together in a project, that is the hard part. And thankfully that is our specialty with experience and knowledge with decades in both the elevator and construction industry.
Unfortunately, though many have been led to believe (by elevator folks) that the elevators are the difficult part of the equation. Couple that with a reputation for unresponsiveness and you have a recipe for agitation and mistrust. Hence the negative comments about the elevator industry.
Overall we got much higher marks for the MEM Elevator System and innovation, flexibility and responsiveness. Those we spoke to realize we are different from others in the elevator business and that even high-quality modular elevators are relatively easy…it is the project integration that is complex and that is where we have an opportunity to shine.
So why are things seemingly so cloudy and murky in the elevator end of the business? Why all the hate? There are several reasons and believe it or not it often earned and not all an evil plot (just some of it is).
The Modular Elevator Manufacturing Elevator System is different. When you are talking to someone about an elevator at MEM, you are talking to the project manager. Your elevator is not going to be passed around like a hot potato. Also, from the outset your elevator and your project are combined. That means one person is working on the details.
So the World of Modular conference presented by the Modular Building Institute was a learning and listening experience. We hope that we were able to hear what you were saying and you see us as your elevator solution. MEM is doing things differently and is starting an elevator revolution where easy, fast installs are the norm and all the details worked out ahead of time. Is it time for you to join the revolution? It is never too late.
As you make your elevator choice remember the MEM System is perfect for any low or mid-rise application and it is very easy to set and start up as we take care of the heavy lifting.
The MEM System is commercial quality elevators installed when you need them in about four hours. They can be started up once we have power and can be used as a construction elevator. Also, they are not just for modular building. Any type of structure can utilize our elevators as a way to get quality installed quickly and off the critical path.
It is time to change how things are done and seriously consider modular. The Modular Building Institute is a great resource if you have questions in general. Or if you would like more information about us specifically and how we can ease some of your elevator pain points feel free to contact us. If you have a project in mind, to get the ball rolling just click the Fast Track Quote button below. You can also see how we produce our elevators with a Live Virtual Tour of our facility. We would love to show off a bit so sign up today.
The most difficult environment for an elevator is a parking garage making one tough elevator essential. Exposure to the elements as well as being way from the main building or in a remote location is often problematic.
Even with surveillance systems some feel there are no prying eyes watching them come and go. Also, the riders are usually not limited to a specific known clientele like in other elevator settings. Most anyone can pick up a ticket to park and go in or even just wander in off the street. Depending on the time of day the elevator can be left isolated and vulnerable. All of this makes for difficult operating conditions including heat and cold, wind and rain as well as an opportunity for vandalism.
The result is a parking garage becomes a true test for elevator durability. Much like the old Timex commercials from the 50’s and 60’s. John Cameron Swayze in his smooth voice would say, “Let’s see what happens when…” And then they would strap a watch to Rocky Marciano’s wrist or Mickey Mantles bat. After taking the pounding it would work like new and Swayze would proclaim it “Takes a licking and keep on ticking.” You need an elevator that tough.
It all starts with design. A tough commercial quality elevator for any parking structure has to be durable first. This is the thinking behind the MEM Elevator System for Parking Structures such as the Bellflower Project as seen below. First and foremost our parking structure elevators begin with a rugged hoistway or shaft welded together from tube steel. They pass inspection in any Seismic or hurricane zone. Then comes the solid steel sling and strong Galvaneal steel elevator cab. All are designed for heavy commercial use. Why? We know what the elements can do and anticipate high passenger traffic. So the unit is engineered to take a bruising in all circumstances a parking garage elevator has to take.
It is also engineered to look great regardless of the building design. Once the fully installed elevator is in place (in less than four hours), nearly any exterior cladding can be applied to match the architects plans for the rest of the project. Just because it has to be one tough elevator, doesn’t mean that it is not flexible in the look. It is then started up in a week and ready to be inspected and used. Our system is so fast in placement and start up it can also be used as a construction elevator.
Additionally, our parking structure design includes special accessories. Vandal resistant features are a must. This includes the control panel and elevator buttons that are created specifically for difficult environments. They are not plastic and easily broken. The overall cab finish can also be designed to be cleaned and buffed like in the above photos. This will help remove graffiti and to stand up to rough treatment. A wood core elevator cab is never a solution for this kind of environment. They use just a thin metal laminate to cover the particle board. They cannot take the demands of cleaning. Also, if the wood core gets wet you know the results. Swelling, chipping, warping and the laminate glue comes loose.
The MEM Elevator System for Parking Structures comes with a ceiling with recessed lights designed to withstand harsh treatment as well. They can also be replaceable if need be. All exterior hoistway finishes on doors and frames are flat, paintable and easily cleaned. The hall calls are in the frame of the door, making them tamper resistant, tough and vandal resistant as well. NEMA-4 Type wiring enclosures can also used to protect the elevator workings against weather conditions.
We have a well thought out approach when it comes to durability. That is due to our decades of experience in the elevator industry in both service and manufacturing. We know the challenges so you benefit from our years of knowledge. Bottom line, we know what it takes to design and build one tough elevator. But beyond that, we deliver it when you need it on the jobsite as a fully installed unit. Here are some videos showing how easy it is.
So, for your next project it maybe time to explore the possibilities of the MEM Elevator System for Parking Structures. See how our experience regarding elevators and parking structures can be a perfect fit. You can click the button below for a Fast Track Quote for a project you currently are working on. However, if you want to explore it more, request a LIVE VIRTUAL TOUR. We would be happy to pull back the curtain and show you how we produce the industry’s most successful modular elevator solution.
Quality is crucial when it comes to anything we buy. That is especially true when we are talking about a commercial quality elevator. The stakes are high and a shaky elevator ride can give a person a lasting negative impression. But more than that a commercial quality elevator carries passengers. So there is a need for quality for the sake of the safety of the elevator riding public. Quality is important. Yet it can seem illusive as with most projects the elevator is the biggest moving object in the build and extremely complex.
Additionally, apart from safety and overall building aesthetics (feel of the ride) there are many others reasons why quality is so crucial too. A lack of hitting high standards also cost time and money on projects. We have all experienced a time when we made a purchase only to return the item for a replacement and then had to return it again. Frustration, waste, anger, agitation and disgust filled our minds as we get in the car for the third time. With quality there is assurance, peace, pride and pleasure.
So how do we achieve our high standards and why do we say “commercial quality elevator” so often?
First we tend to say it a lot because of factors beyond our control. Perception can be misleading, but in the minds of many a reality. With modular there is sometimes the perception that with the ease modular provides there must be compromises. The product in many ways seems to good to be true so mentally there is a leap to possible issues that don’t exist. We have been working diligently for decades to dispel that notion. In every project we produce we care deeply about quality and it shows. So in reality it is more of messaging to correct a perception may have had some grounding in fact, but is now decades past its shelf life. We are quality at MEM.
We also sometimes have pushback from a threatened industry. The monolithic elevator industry sees the writing on the wall, but due to their business model, they cannot extricate themselves from the traditional elevator build and installation. They have literally been doing elevators the same way since the mid-1800’s. No kidding. Elevator installation has not changed since the Civil War… our Civil War… in the US… over 160 years ago! In 1859 the Cooper Union Foundation Building had an elevator shaft built in (even though passenger elevators were not available). Then, once completed the elevator was brought into the shaft on piece at a time just like today. That model has not changed since. What other product on Earth has seen less innovation in its process since the 1860’s? Innovation threatens so they attack.
In a nutshell, the above are the reasons we stress our quality so much.
More importantly, how do we achieve quality? We can say we have quality and that quality is worth having, but all that talk is completely nullified if we can’t produce it. We do and I came up with five ways we assure quality with every project going out the door:
This refers mostly to the hoistway, elevator car and sling and other items we manufacture in house. The factory process uses templates, quality materials and well thought-out and practiced procedures. For instance our cab is tough Galvanneal steel easily produced to exact sizes by use of templates and guides. We would never use flimsy particle board covered in glued on laminate. That kind of cheap product is apt to warp, expand and flake.
This term encompasses the pride of the team members at MEM and their experience. It begins with the sales representatives. They are the most informed and knowledgeable people regarding modular elevators and elevators in general you can find. This is crucial as they guide the process from beginning to end. They set the pace and know each project completely and intimately. We also meet every jurisdictional requirement with licensed welders, electricians with years of experience and employees that have pride in their work. Lastly, we thoroughly inspect every elevator we manufacture with a 10 Point Inspection – Check List. Using that list a certified elevator technician performs the inspection. In this way you can be sure that when we ship an elevator, it is the quality we promise. We also provide consistent inspections through out the build.
Dirty little secret…they are all the same. It really does not matter the name plate on the control panel in the car. Every elevator contains roughly the same components. All the parts have to meet the same high standards regardless of the company providing them. High-quality standards are demanded and required by law, by jurisdictional code and by regulation. We abide by all to produce quality everytime.
Our factory process produces consistent quality. But that does not mean we are stuck in old ways or not flexible in design. We think though what we do, provide for flexibility and constantly assess how we can improve. We test and update our process as needed. Additional benefits including being inside a factory. Cold and heat do not interrupt our manufacturing, nor do they act as an impediment to consistency. Whether we like it or not if it is snowing outside at 20 degree, traditional construction suffers. This is seen every time a traditional built hoistway it not plumb or level. Our building practices are perfect every time and on time every time.
Two quick points. Our design is based on more experience than any other modular elevator company. Also, the engineering is improved consistently over time. We have made design improvements that others have not. Also, not only do MEM elevators meet the engineering standards of difficult Seismic areas, they are also used in high wind or hurricane areas. The MEM Elevator System is also designed for more efficiency in installation and setting the elevator. Our experience in the industry makes us the leader in design and engineering.
When we say our team has a fully-installed commercial quality is set in four hours we mean it. The same goes with start up. When power is available we can have your elevators running in a week. This is due to our superior quality. Our team consists of elevator people through and through. Passing inspection easily is the rule because of the design, engineering, production process and quality.
It is one thing to talk about quality and quite another to see it. So we invite you to see it firsthand. You can click below to schedule a LIVE VIRTUAL TOUR. We will pull back the curtain and let you see what we are doing, how we do it and why it is the best option for all low and mid-rise projects. The difference in quality will be clear. Of course during the tour you can ask any questions you want. We are open with our process and proud to show it off.
If you have a project in mind already click the button below for a FAST TRACK QUOTE. We will contact you for additional particulars, but will provide you with a budget number with in 24 hours. There of course is no hard sell or obligation. We just want to be able to answer your questions, find out your challenges and help be a solution. That is how we are a part of the elevator revolution.
Modular Timeline the Secret of Success. When it comes to success in construction it usually boils down to getting the job done on time. You can have the greatest plans, design or ideas, but if not executed in a timely fashion the value diminishes.
Construction projects outside of infrastructure generally are built for occupation. Any delay of occupancy is money out of the pocket of the owner or investor. That means pressure on everyone and makes time extremely important. That is the primary reason for success of modular and the modular timeline.
This striking revelation occurred to me when speaking with a building owner. He was checking up on a project with the project’s manager. The build in question was the first time this particular owner had sunk time and money into a modular project. Needless to say he was a bit apprehensive. However, after getting a breakdown of the progress he was amazed.
He claimed the modular elevator alone made him a million dollars based on faster occupancy. That may have been an exaggeration. However, the smile on his face when he said it, made it more than convincing to me.
See, he was long in the tooth so to say in the traditional construction industry. As such he was filled with doubt regarding timelines. That doubt bled over to concerns regarding the completion date promises of the modular companies employed. His feeling of skepticism was well warranted based solely on his background in the traditional construction trades. He became numb to the habits of contractors. They make promises and then excuses and then more promises as they face delay upon delay. He expected nothing less with a modular timeline on the project. But to his pleasant surprise the timeline was kept and ancillary benefits began to pop up.
So what is the modular timeline compared to that of traditional building and why does it matter?
I have used this chart a number of times from the Modular Building Institute. The institute and their entire staff are a great center for information and knowledge regarding modular construction.
Want to dive deeper? I would highly recommend that anyone curious at all should attend their upcoming World of Modular convention. It is in San Antonio, Texas – April 25-28. We will be there in person for additional questions about modular in general and modular elevators.
Back to the timeline graph. It clearly demonstrates the time savings overall for most projects as there is multitasking employed to take advantage of off-site manufacturing. When modular units are built in factories, the time is simply shortened. But what is not incorporated in this chart are the ancillary time savings and benefits.
The secret of success of the modular timeline is slowly, but steadily and surely getting out. More and more builders and building owners are taking the plunge. They are exploring what modular has to offer and how the modular timeline can be a huge benefit.
But what about the timeline for modular elevators? Is that as beneficial? The answer simply is yes. The MEM Elevator System is beneficial for the whole project and the results are stunning especially when taken of advantage of in full. Can you imagine how your project would change if you could determine when your fully installed elevator arrives? Then started up in less than a week? Or realizing it goes in so fast it often doubles as the construction elevator on the job? That is a game changer, especially in current times where every penny counts. Take a look at the timeline below.
So now is the time to act if you have any questions about modular elevator or the MEM Elevator System. If you are the least bit curious about Modular Elevator Manufacturing just click the button below. You can get a LIVE VIRTUAL TOUR of our factory. We will pull back the curtain and let you look at our process and how we are leading the modular and elevator revolution.
Do you have a project in mind? To get thumbnail numbers to consider, just click the Fast Track Quote button below. We will be in touch in less than 24 hours. At that time we will give you an idea of how your project will be improved and your investment. You will also find out what it takes to make a change for the better.
We need Supportive Housing Elevators Fast. Supportive housing is also referred to affordable housing or low income housing, but regardless of the name the need is more than evident. So, when it comes to housing the homeless, faster is better to address the issue. But also we must use the resources available in a timely fashion. Funds are being allocated to help right now. As an example the Los Angeles City Council has approved more than $51 million in financing for the construction of new affordable and permanent supportive housing developments.
But that funding can be slippery if not acted on quickly and the need could continue to go unaddressed if not used. The bottom line is that funds allocated need to result in actual building projects that are designed for housing the at risk population as quickly as possible.
And there is the problem. As everyone in the construction industry knows, a building does not pop up overnight, even when funding is approved and support is given. It takes plumbing, electric, foundation work, drawings, permits and approvals. Lastly, if over one story the project takes the slowest component of any build project, an elevator. But Modular Elevator Manufacturing (MEM) has the solution.
Elevator Sales Executive – Christian Lahud from TLShield & Associates explains, “In traditional construction the elevator hoistway is built and sits until power is turned on at the end of the project. Then and only then elevator technicians show up. They come and go at their leisure, carrying in elevator parts and installing them one at a time until the elevator is running.” Lahud went on to say that, “The elevator and its mechanics are the first on the site and last to leave. Everything is slowed down including other trades that need the elevator installed to finish.”
The MEM Elevator System however is produced in a factory environment where a hoistway is constructed with steel. The structure is engineered to be strong enough to be self-supporting in most cases. Then all of the elevator components are installed in the hoistway in the factory.
Ultimately, when it is needed it is loaded on to a truck, shipped to the jobsite and set in place. In four hours you will have a fully installed, commercial quality elevator ready to be started up and used. It can also double as a construction elevator.
Lahud says this makes MEM perfect for the affordable housing market. “The MEM Elevator System is high-quality, but fast in setting and startup. It is a real solution where speed is of the essence to address a pressing need. No other elevator system is shipped and in place when the customer wants it.”
How do we know we are the solution? Over the decades of experience we have produced several elevators for supportive housing with just a couple of the most recent projects pictured. As you can see, whether a steel frame structure or modular structure involving storage containers, the MEM Elevator System is a perfect fit. We can be what you need regardless of the structure type. Right now due to the speed of modular construction and the immediacy of the problem there seems to be a high demand for modular structures. But another fast way to build housing is using an existing structure.
With that in mind, we are perfect for retrofit opportunities. The initial purpose of the modular elevators was to attach them quickly to exteriors of existing buildings to make them more accessible. We have grown from servicing just that market over the past 30 years, but we are still experts you can rely on if you have a retrofit project in mind.
Wrapping it all up the benefits are obvious:
It maybe time to explore the possibilities further regarding supportive housing elevators and see if the MEM Elevator System can meet your needs. You can click the button below for a Fast Track Quote for a project you currently are working on. However, if you want to explore it more, request a LIVE VIRTUAL TOUR. We would be happy to pull back the curtain and show you how we produce the industry’s most successful modular elevator solution.
Modular Elevator Manufacturing (MEM) would like to take the opportunity to recognize and thank all the women in the construction industry during this special week. Women are at every level of the industry due to their hard work, knowledge and abilities. We celebrate Women in Construction Week!
We would also like to shine some light on one of our own and acknowledge her efforts at MEM – Michelle Barra, MEM Corporate Coordinator. Michelle has been with the company only four years but in that time has made a big difference. She quickly showed the initiative, drive and ability to be a leader in a field largely dominated by men. During her time she has gained responsibilities, faced challenges with success and is considered by all of her co-workers as the lynchpin to MEM’s ever-growing success.
She is happy with the difference she has made, the progress she has seen in a male dominated field and also that MEM looks at what a person can do and not who they are.
“Being a valued team member in a profession that traditionally has been largely men shows real progress and opens the doors of opportunity. I am glad that MEM looks at my abilities and what I bring to the table.”
Prior to her employment at MEM Barra was in the US Airforce in another traditional man’s world. She kept F16 fighter jets in action as a sheet metal technician. She earned high praise for her skills and abilities, and gained valuable insights into the leadership skills necessary in the construction industry.
She brought that record of success and positive attitude to MEM, where she has been a big part of building it into the largest provider of modular elevators in North America. But, she takes it is in stride, “Here we all pull together and focus on the job as a team. My position coordinates all the moving parts from production to the final inspection process. I know I am respected as a team member and leader and my contributions are valuable.”
MEM is thrilled that Michelle has made a difference and we congratulate her during this special time of recognition.
I just finished writing a great blog about how Modular Elevator Manufacturing (MEM) is in complete in support of the Modular Building Institute (MBI). Also, included is how we support the modular building industry as a whole and promote the benefits of modular construction. We are even going to the MBI annual convention (see more below)! Then I realized that many could confuse our support with use of our elevators. To be clear and to set the record straight, our MEM Elevator System is compatible with any structure type.
The ability to be compatible, depending on the height, is that MEM elevators are designed to be self-supporting. That means they can be place on the interior or exterior of buildings. Regardless of the construction method used MEM is a fit. Everything from post-and-beam construction to heavy steel framing can use a modular elevator. Even concrete structures can and do incorporate modular components, including the MEM System.
In real terms there is no difference in the use or components in a traditional or a modular system. Our commercial quality elevators are just that, high quality. Modular is just superior. The MEM System provides a fast, high-quality solution that allows you to decide when the unit arrives. When you need it, it is delivered. An elevator shaft lowers into place with a factory installed elevator inside and ready for start up.
Another application that traditional elevators really struggle with are when it comes to retrofit projects. They are a piece of cake for us. Modular elevators are used in additions to structures, exteriors of existing buildings, stadiums and also in the center of existing buildings. And, it is not as hard as it sounds. The good news is that we have had decades of experience. With our help you can determine the best way to place the elevator regardless of the structure type. To assist we will not only provide you with drag and drop drawings, and engineered plans but expert advice. With our system and our help you will accomplish your goals for your project.
Now let’s be clear there are some limitations. MEM elevators are engineered for low and mid-rise applications. Also, depending on the location of the build, there may be some issues with crane use or getting under bridges. But, those are usually minor problems and usually we find ways to circumvent almost any challenge. Here’s an example.
So is the MEM Elevator System perfect for modular building? You bet. But, our elevators are utilized for almost every structure as well.
If you want to find out more about our system you can come and see us at World of Modular. We would be glad to speak with you about the benefits of modular and how our elevators are leading a revolution in construction. This year the conference is in San Antonio, Texas – April 25-28, 2022. If you go (and we highly recommend it) make sure and stop by booth #4. There you can discuss the elevator revolution with our national territory manager Ken Grider.
He will be able to answer any questions you may have and give you a thumbnail price on the spot. If you just can’t wait for the show, you can contact us below for a Fast Track Quote. This quick quote will give you all the pricing information you need to begin your project. You can also sign up for a LIVE VIRTUAL TOUR of our production facility. During the tour you will see how we produce the highest quality modular elevator in the industry. We will take any and all questions about MEM while we show you what we do. Find out how we are taking the elevator industry higher.
Well our full name is Modular Elevator Manufacturing (MEM). We have been in the modular and elevator business for around thirty years and as a result the modular industry is very important to us. We see modular as more than just another way to build. It is a continuing and growing methodology that has forced needed change into the construction industry and elevator industry. It has challenged the status quo with better, smarter, safer and faster ways of producing everything from homes to commercial buildings. This approach has resulted in a revolution that we are proud to be part of where there is more accountability and better processes.
For instance with the MEM Elevator System a fully-installed, commercial elevator is placed in hours and started up in a week. It is incredible and something traditional construction cannot accomplish. Our high-quality system goes in so fast that it is often used as the construction hoist to save even more money on projects.
With that said, leading the charge in the revolution towards better building is the Modular Building Institute (MBI). No doubt as they say, they are “the voice of commercial modular construction”! Their mission is to expand the use of offsite and modular construction through innovative construction practices, outreach and education. They do a fantastic job at fulfilling that mission.
So, if you are a modular producer in the construction industry you should be a part of that organization. We are at Modular Elevator Manufacturing. But more than that if you have any questions about modular, MBI and MEM regarding elevators are experts.
To show off a little bit each year MBI has an annual convention called appropriately the World of Modular. This year it is in San Antonio, Texas – April 25-28, 2022. So, if you are not a modular company but are the least bit curious about the modular industry, I would highly recommend attendance. You will find the leaders of the modular business there discussing alternatives to conventional construction and how modular building continues to grow and change the way projects are completed. It is a place to network, exchange ideas, learn from experts and discuss issues.
At MEM we see joining MBI or attending World of Modular as the first step in joining a revolution of better building and higher quality practices that is changing the world of construction. We look forward to seeing you at the show. Make sure and stop by booth #4 and discuss the elevator and modular revolution with our national territory manager Ken Grider. He will be able to answer any questions and give you a thumbnail price on the spot.
If you just can’t wait for the show, you can contact us below for a Fast Track Quote. This modular elevator quick quote will give you all the pricing information you need to get started. You can also sign up for a LIVE VIRTUAL TOUR. During the tour of our production facility you will see how we produce the highest quality modular elevator in the industry. You can also ask any questions you would like about MEM and our process.
So for some see you in San Antonio or for others, see online live!
Elevator cuts costs as inflation rises. Inflation is not just a term thrown around by the Wall Street crowd or economists. Inflation is very real, very damaging and turns out not transitory (whatever that means). As the January numbers reveal inflation is with us. And an economy does not shift at a whim especially when the all the forces are aligned for inflation and the social psychology for it has set in. The ripples are felt throughout the nation in every home and every sector.
That is especially true in the construction industry. We are engage in long-term commitments and obligations with slim margins. That puts more pressure as we build, meet payroll and see operating costs explode. Suddenly, we grasp for every potential savings available by trimming general costs and seeking alternatives. Surprisingly, the elevator cuts costs as inflation rises, but only if you choose the right alternative.
The right alternative is a commercial quality elevator that has a long-term history of success and that can replace the need for a construction elevator on the jobsite. By consolidating the tasks of a permanent elevator and a construction hoist, costs can be significantly reduced. But, only an elevator fully installed at the beginning of the project and ready for start up early on can meet the need.
This month’s project spotlight is really several projects, but two in particular that we just finished installing where the permanent elevator doubled as the construction hoist. Not having to employ a construction elevator can reduce costs immensely. This option is not just a way to save during inflationary times, but just smart business.
In both cases the elevator unit or MEM System was in place early in the project. The system can be engineered to be self-supporting, so it is placed and awaits power, set up and inspection. The set up portion of the project is usually less than a week in total hours. This makes it not only plausible to save significantly, but a certainty of reducing costs.
The Miss ECB project fully demonstrates the time and costs savings. As you can see it operates just like any other construction hoist with a set call box for access. Finish protection is key. Protective panels and wraps are in place during the build. You can also see that it is not a project dependent on any one type of construction method. the MEM System is at home in modular construction to stick built applications.
You can see there are two sections as pictured above. They are stackable units that make up the hoistway. The entire process took less than four hours to set. As a result, the fully installed elevator through the MEM System was ready for start up and inspection once power was supplied.
If you want to find out more about how choosing the right elevator cuts costs click below. You can either get a thumbnail budget number for the MEM System for your next project or, your can schedule a live virtual tour. During the tour we will pull back the curtain, so you can see how we produce the best elevator solution for all mid and low-rise applications.