Shark Bite and Modular Elevators – Newhart Middle School/Mission Viejo, CA. Innovation can be hard to accept and try. In Mission Viejo however, they are embracing innovation and teaching it in a brand new facility at Newhart Middle School.
At the recent open house Superintendent Kirsten Vital Brulte said, “We look forward to seeing how they use this innovative space to further their STEAM education.” There is no doubt the facility will be put to good use, but there could be a bigger lesson about innovation and acceptance of technology that we all could learn.
This lesson of trying innovation struck a cord with me during a recent home renovation. We added on to our modest farmhouse a kitchen and upstairs bath. Of course to keep the costs under control, my wife and I decided to do some of the work ourselves. I am not totally without skills. The result is we took over some of the obvious stuff that we knew we could do. Painting, trimming out windows and doors and baseboards.
I also considered making the plumbing a DIY project. It was just a sink and dishwasher in the kitchen. Pretty straight forward. However, I was worried as it had been sometime since I sweated pipes. I then looked into Shark Bite plumbing and my suspicious mind started racing. It looked easy…too easy. If I used the snap together plumbing, I would definitely be able to avoid the difficulties of copper, but at what cost? Was this truly going to snap together so easily and hold?
I would have definitely saved a ton of money, been able to put the plumbing in faster and complete the job on my schedule, meaning the kitchen would be ready sooner. You can only eat take-out off of paper plates for so long.
Ultimately, however, I wasn’t convinced. I just couldn’t do the job with this new fangled product.
We got a great reference for a plumber and so after he saw the plans and agreed, I wrote a check and scheduled the job. Weeks went by but in his own sweet time he arrived. However, as he clambered out of his van, what did I see? Rolls of PEX tubing. Also, all his shelves were filled with connectors and fittings for snap together plumbing. He said that for jobs like mine, that was what everyone is using. It was easy and quality.
I watched agog as he went to work. It was as he promised and I had been a fool. I could have saved money, time and effort by doing it on my own with a more advanced product. Before lunch, he was out the door telling me to call if there were any problems and let him know when everything else was done so he could set the fixtures.
I guess you sometimes just have to live to learn.
I immediately saw parallels between Newhart Middle School, Shark Bite and Modular Elevator Manufacturing. The MEM Elevator System and snap together plumbing have been on the market for over twenty years. Both are innovative and have revolutionized their industries. They are proven to reduce time, reduce costs and are just as good as what they have replaced. High-quality is a must for a commercial elevator.
Lastly in my case regarding plumbing anyway, both struggle with acceptance. Shark Bite and modular elevators have a hurdle to clear. They must convince the market by seeing them in action and by being open and honest about what is offered and the differences between the revolutionary and conventional.
So we are working hard to provide examples of our product, like Newhart Middle School pictured. What you are seeing is a fully installed elevator being placed through a hole that was left in the build. It was set in just a couple hours and was started up in a couple of days. Revolutionary!
As you can see, the project looks great. It went in faster for the school with no disruption to classes and overall their embracing of innovation in what they teach and how they teach it, will be a lesson for all.
If you would like to see about this project or others like it, we are opening up our factory to live, virtual tours at your convenience. All you have to do is click the button and fill out a simple form. We will then schedule the tour at your convenience. During the tour we will answer any and all questions. You can also schedule an in person visit as well.
Lastly, if you have a project in mind and want to speak directly to one of our representatives fill out the Fast Track form. We can provide you a thumbnail number in hours.
For more great photos of the project, visit our good friends at Miller Construction. Their team did a great job!
Hope On Avalon/Los Angeles, CA – When it comes choosing the elevator type for any job, Modular Elevator Manufacturing will help. We are not a one size fits all elevator company, trying to shoehorn projects into a singular kind of elevator. Also our vast experience and knowledge helps guide during the project in making the best choices.
That’s the case at our current elevator jobsite at the Hope On Avalon project in Los Angeles. On that project we partnered with Ed Grush – project general contractor, KTGY – project architect, Silver Creek Industries – modular supplier and Danny Moizel at HGB Modular – consultant. Working with that group is like working with the dream team of construction and all were a joy to work with. They are each knowledgeable, experienced, have well run organizations and are leaders in the construction industry and modular industry as well.
They came to us needing a 5-story elevator for a transitional and supportive housing project. The solution was a stackable hoistway and an in-ground hydraulic jack. Setting the fully installed elevator was complete in just a couple hours. We were glad to be a part of the project.
Using an in-ground jack was the best solution for the project. It has a fast, smooth ride that will serve the purposes well. The cab is made of tough Galvaneal steel with vandal resistant hall calls and buttons. It will handle the rigors of service for decades. We do not use wood core or particle board with the MEM Elevator System. Galvaneal reduced mold issues, chipping, breaking and warping that can occur with wood core cabs.
As you can see in the video, the hoistway is built with tough 4X4 inch steel meeting all requirements. All the elevator components are installed and then it is wrapped in drywall ready for cladding. The elevator and jack arrive on a truck and then the in-ground jack is simply lowered into the pre-drilled hole. The elevator bottom section is placed on top. Then, the upper section is lowered in the same way and connected. The right elevator for the right job. Fast and ready for electric and start up.
The mission of this project is important. The elevator and the Hope on Avalon project are crucial to combat the growing homelessness issues in Los Angeles. There are several benefits for supportive housing with the MEM system:
In conclusion, it maybe time to explore the possibilities further regarding supportive housing elevators. Let’s see if the MEM Elevator System can meet your needs. We would love to be a part of recommending an elevator type that suits your project best. You can click the button below for a Fast Track Quote for a project you currently are working on. However, if you want to explore it more, request a LIVE VIRTUAL TOUR. We would be happy to pull back the curtain. We will show you how we produce the industry’s most successful modular elevator solution.
Place your elevator order now. There are three distinct dynamics currently at play right now at Modular Elevator Manufacturing (MEM). These dynamics may come into play regarding your elevator order. They may influence when you pull the trigger so we want to be up front in all respects.
We are facing challenges just like most of the construction industry with supply issues and inflation. Elevators are unique, but not unique enough to avoid basic economics. So the current climate inevitably leads to the following question. When do you pull the trigger and OK the elevator order? You know you need one…so when do you start the process. Below are some things to consider.
First, we recognize that times are tough or at least getting that way. These tough times extend to all your suppliers us included. As a result we want to let you know everything we can to keep you informed. See, we understand the dilemma you are in and want to be real clear and honest about the market now and how it will effect your building project. So here are three important things to think about regarding timing of the elevator order. Consider the following:
Explaining point one in more detail. There is a myth floating around out there that an elevator can be produced in less than eight weeks. Lead times for the components alone blows that old canard out of the water. It is simply not true and if it would be possible, I’m not sure I’d ride in it. How the process really works in the modular industry is the elevator begins production based on the delivery date.
“We know deliver dates change and you don’t have a crystal ball! But it is crucial to get your project in line early.”
We simply count backwards based on the time it takes to get high-quality parts delivered and for production to occur. That is when we place your elevator in line for production. Yes, some components are produced in our factory, but like discussed in other blog posts, elevator components come from just a handful of companies. So we set the day of production beginning when the parts will arrive and so production finishes when you need the elevator. Simple math allows for you to get your elevator when you need it, not before or after. As our queue is constantly filling and emptying letting us know early by placing your order gives us more flexibility. The earlier we know we are producing your elevator the better. We know deliver dates change and you don’t have a crystal ball! But it is crucial to get your project in line early.
The second point is more difficult on everyone. If you don’t believe me, step outside and look at a gas station sign. The cost of everything delivered has been on a steady rise. Inflation is not “transitory” as first errantly promised and is probably here to stay for the foreseeable future.
The elevator industry has been somewhat shielded from the rise as only around 10,000 elevators are sold in the US every year. It seemed like there may have been enough chips, ropes, and buttons to go around, but supply is tightening.
So far we have done our best to hold the line, but it is becoming more and more difficult to avoid costs being passed on to us from others. That means if you are at a stage of where locking the elevator in is possible…do it now. Of course we would want you to lock in the MEM Modular Elevator System, but it is wise advise regardless.
The last point from above. With all construction costs set to increase, finding savings is crucial. Depending on the job, you may well be able to draw a line through an item completely in your budget. If you use the MEM Elevator for the construction elevator as well we save you money. But, keep in mind the first two points hold regarding timing and inflation. Lock in your elevator order now.
Nothing can be more irritating than facts especially if you don’t like them. But, this blog post laid out the facts about an elevator order and the need to think it through quickly. Because although this is about MEM, it is largely the same throughout the elevator industry (here’s an article). Prices are going to increase.
We can help you with your decision making process by giving you a live virtual tour of our factory where you can ask any question and get clear answers. To sign up click the button below. We can and will discuss any questions you have.
If you do have a project in mind and would like information on pricing, logistics, quality or our process just give us some general information. We will respond back with thumbnail prices and be ready to answer any of your questions of concerns.
Understanding the Elevator Industry – The elevator industry seems like a tough nut to crack. They tend to keep to themselves with their own language and their own priorities. They do not even like to talk about anything beyond your need for them. And so far the cloud of mystery is working pretty well. Motivations remain obscured. The technical jargon overrides any conversation. The result is the construction industry remains beholden to just a handful of providers. This is despite the elevator being a rather simple product. One box going up and down inside another box.
But can it really be that simple? It is more complex than that for sure, but the obfuscation by the elevator industry does not help their reputation.
In this blog post I am going to uncover just a few truisms of the elevator industry from the inside. In that way you will understand them or us better. Then you will be able to make more informed decisions regarding vertical transportation. So, here’s the short list. They may shock you and shake your current understanding of the elevator industry, but here they are. I will write about each in more detail below:
Now let me be clear, I am not passing judgement on the ethics of elevator companies. It is just important to understand the industry better. Our hope is that this will allow you to make better choices on your next project.
For most manufacturers, when you buy the product it ends the process. You have what you want. They have what they want (in the form of payment). Both go separate ways unless there is a problem. Not so in the elevator industry. It became apparent early on that there is a ton of money to be made in maintaining elevators. Also, as the product improved over time, it became even more profitable. The parts became more reliable and standards improved. The maintenance contract was born.
To substantiate that point, Otis in a recent SEC filings said, “New Equipment and Service, which, for the year ended December 31, 2019, contributed 43 percent and 57 percent of our net sales, and 20 percent and 80 percent of our total segment operating profit, respectively.”
Did you get that? That means is that new equipment or elevator sales while important are no where near as profitable as the maintenance contracts. Why does this matter? Because selling a type of elevator that maximizes profitability in the maintenance contract is the goal and not necessarily what you need.
One real quick example. In a low rise project often the most cost effective and best functioning elevator is a hydraulic unit. Of course that depends on several factors. Yet people have been upsold and bought a traction unit (one with ropes) when one is not needed in the least. The cost of the maintenance can be three times as much for the traction unit.
Understanding that can change perspectives on the unit required. And there are many other factors that can be influenced with that knowledge. One certainly would take more time to consider the maintenance contract and care less about the up front cost of the unit.
An often overheard phrase regarding elevators is whether parts and components are proprietary or not. Proprietary in the elevator industry does not generally mean what it does in most other industries. Proprietary components outside of the elevator business usually indicates something special. It is something that sets one product apart from the others. Or it can mean something they want to keep secret from the competition.
Not really the case with elevators. The purpose of “proprietary” parts in the elevator industry is not to hide some special trade secret or technology. After all it is just a box that goes up and down in another box. It is to prevent the building owner from hiring a different company to maintain the elevator. As mentioned above that is where additional profit comes from. If proprietary parts did not exist, any elevator technician could service any elevator regardless of brand. Proprietary parts primary purpose is to keep you locked in. Unlike most any other product, you just can’t buy a different elevator once the one you picked is in place. They have you and they know it.
Never shackle yourself to an elevator company by using proprietary parts. Ever. There are alternatives.
Have you ever been to a factory? I have had the pleasure of touring all sorts of manufacturing plants in my life time. From sausages to automobiles I have seen it all. In those facilities it is much like what you imagine. A product starts out in a simple form traveling down a line. During the trip components are added or processes completed. At the end, like magic, a brand new car rolls away or a delicious link of smoky pork sausage is made table ready.
If you are thinking about saving time and trimming costs, the traditional elevator cannot be your solution. Why? Because your jobsite just became an elevator factory.
That process is not what it looks like for big elevator companies. They do produce some components, but in real terms they are bundlers of other companies parts and pieces. They crate them, ship them and cobble them together on site. But the elevator is not manufactured at all, and the parts they actually make are limited. Believe it or not elevator companies have admitted that the real “manufacturing” takes place at the jobsite. The parts for all elevator companies come from a very limited pool of actual manufacturers.
It would be like ordering a car from Ford but instead of a drivable vehicle its like getting a crate delivered with all the parts. Then, they would send a crew to assemble it in your drive way. That is how traditional elevators are created.
This is important because a “quality” sales pitch is nothing more than that unless there is a different process all together. All elevator parts are largely the same and where they differ, they still have to meet the same rigorous standards. Could you imagine the quality issues and interruptions if your car were assembled in your garage? It really is crazy.
Why does that matter right? Really, why does it matter where the manufacturing takes place? It matters because that explains why it takes so long for an elevator installation. Also, if you are thinking about saving time and trimming costs, the traditional elevator cannot be your solution. Why? Because your jobsite just became an elevator factory.
If you choose a traditional elevator company, you will be a lot better off mentally if you just accept the way they do things. Then resign yourself to handing your site over to them until they are done. Things cannot change because the process does not change. You will never be able to hurry a project or even predict a completion date through the traditional elevator company. Believe it or not they have been installing the same way since before the Civil War…our Civil War…in the US. No other industry has moved that slowly regarding innovation.
Why are there delays? Because for the elevator to be assembled, you have to have the right factory conditions and all the necessary parts at your jobsite. One missing part can mean days of delays. If the building gets too cold the elevator crew leaves. This all slows down the process and gives little room for real improvement and no control.
The reason you have lost control of your project is it is now a manufacturing factory for an elevator.
This is usually where you would find the pitch. I have made a compelling argument now I just need to close the deal right? Wrong. At Modular Elevator Manufacturing we know the MEM Elevator System is a much better alternative than traditional elevators, but we also know that acceptance will not come overnight.
The traditional elevator companies are engrained in the construction industry. We know this! So although we care about sales, we care more about the long run. Education is the key. We need to simply inform people as to why things are as they are. Over time we will be viewed as the solution we are and we are willing to accept that. In the mean time we want to be a part of the discussion, a resource and able to give important elevator industry information. We are hoping to bridge the gap between the construction industry and our industry that will lead to better processes, innovation and installation. Our better way through modular elevators will win you over eventually. The MEM Modular Elevator System is actually factory produced and have tons of benefits, but we know recognition of that comes with time.
However, if you want a tour of our facility just click the button below. You can also request a quote if you have a project in mind. We would be glad to supply you with thumbnail numbers.
Elevator Pain Diagnosis – Our goal is to revolutionize the elevator industry and make improvements for everyone. We are not happy with the current reputation of the elevator industry and this is part of our ongoing effort to correct problems by identifying elevator pain. But, we need you! So please read on to help us change the elevator industry for the better.
The MEM Team
We have all been there. Sitting on a paper covered, padded vinyl table with nothing more on than a flimsy, backless gown that doesn’t fit quite right. As we awkwardly fidget back and forth, trying to get comfortable and avoid the cold spots on the table, we know there is something wrong that needs special attention.
We need to get rid of the pain we have been facing, but because we are stubborn or embarrassed or both, we tend to ignore the misery just hoping it will go away. As the constant discomfort begins to needle us more and more, we finally have to breakdown and try to do something about it. So we go to the exam room and after a long wait the doctor finally strolls in and the first thing out of his mouth is, “Where does it hurt?”
It is a funny question because we have already told the receptionist where it hurts, the nurse, our significant other, and anyone else that would listen to us complain. But now we are speaking to someone that can actually get to the root of the problem and make the pain, hopefully, disappear–so we tell our tale of woe.
It seems with elevators and construction projects there is pain as well, but there are no experts looking for the root problem to the pain we face. But no one doubts when it comes to a multi-story project there’s a sizable amount of it. Just like the pain we feel when we have a doctor’s visit, we have told countless others about the constant throb that drives us to the brink of insanity. It is real and not unusual as it is universal to the construction industry, yet the problem seems to be undiagnosed and outside of our grasp. In the whole of the construction industry, there is nothing that slows down a project more or creates more friction than the elevator. That said how do we get relief?
It starts with assessing the pain. The list of pain points is exhausting: “We were promised a fully functioning elevator in three months,” “The cost is not what was promised,” “I am being change ordered to death,” “I call and call and no one ever answers even basic questions,” “The bad weather is delaying the elevator,” “The elevator company has halted all other construction until they are done,” “Missing parts slows the project,” “It seems the elevator company is working against us instead of with us,” “Why must they take up so much room on the site?” and more and more and more.
Each of these problems are typical and create issues that mean delays, cost over runs, and pain for all parties involved. But we are going to start doing something about it. But we need you to tell us where it hurts.
You are a leader in the construction industry. It is why you get the monthly newsletter. And we are the largest manufacturer of modular Elevators. For too long there has been a disconnect between your trade and the elevator industry. It seems we are almost speaking different languages.
Both of us seem to be missing each other in the planning, coordination, installation and start up. But that does not mean we have to accept it or live with it anymore. We can improve and to do so we are looking for some help in closing the information gap.
Ultimately, we would love to put together a guidance document for elevators in general, establish a professional group and have open forums to assist both industries with coordination and integration. However, we know and understand the value of your time. So, to get the conversation started we were hoping a simple five question poll could get us pointed in the right direction.
We hope you will help. The elevator industry has not been a very good partner in many ways, so you will not hurt our feelings by being blunt. We know making systemic changes will take honest dialog and we are willing to listen.
Here is a link to the survey. It should take less than five minutes to complete. Remember it is a starting point and we will share all of the results to begin understanding each other.
Just in case you want to see what we do, you can click to schedule a tour. Or if you are intrigued by us you can get a fast track quote.
You can join in and discuss all things modular elevator with myself and offsite construction leader Audree Grubesic from Offsite Dirt on May 31st. If you have questions about Modular Elevators, this is a great place to start. So sign up today! I will be answering questions and discussing how Modular Elevator Manufacturing and the MEM Elevator System is the absolute best solution for any low or mid-rise building project.
We are more than happy to participate with Offsite Dirt in their Offsite Construction Series. It is an online, forum where industry leaders are asked questions about the solutions they offer, what the future holds and the impact they are having in the offsite industry.
We specialize in low and mid-rise modular vertical transportation. And the MEM Elevator System can work for on or offsite projects. So if you have any questions at all, join us by signing up. Looking forward to the questions and seeing you there.
Offsite Dirt is a media leader when it comes to the modular industry. They showcase current news, techniques, technology, influencers, and conversations in offsite construction. In other words they are all things modular.
Offsite Dirt has a two-pronged mission: to inform the construction industry and the general public on the intricacies of what’s currently happening in the fast-growing offsite construction field, and to provide a meeting place for offsite construction professionals where information, opinions and resources can be freely exchanged.
If you have a project and need some questions answered but not able to attend, click the buttons below. We can schedule an informational live virtual tour of our facility. If you have a project in mind, we can answer your questions and give you thumbnail numbers in a day or less.
Hope On Hyde Park/Los Angeles, CA – MEM Experience paved the way for participation in this worthwhile project. When looking at elevator options, several considerations were made, but the experience of MEM (Modular Elevator Manufacturing) and TL Shield & Associates as the onsite elevator team paved the way for this exceptional project. MEM is proud to be a part of this project with C. W. Driver and they are grateful for what we bring to the table. “We appreciate MEM’s experience in the elevator industry. They helped keep the project moving forward and on time.” – John Kately, Project Executive, C.W. Driver.
Why are we so proud? Hope On Hyde Park is a big deal as a modular project but also due to the building’s mission. The project uses locally fabricated modular building units, including a state of the art, easy installing MEM Elevator System. This will create a modern and affordable transitional housing community for the Los Angeles homeless population.
The five-story development will offer studios and one-bedroom apartments on a 0.49-acre site. Residential services and a boxing gym will be located on the ground floor. The 98-unit building will be constructed around a central courtyard, providing privacy, safety, and a deepened sense of community. Parking spaces will be provided for social services staff while each resident will have a bike storage space. Floor to ceiling glazing along the amenity space will engage the community and brings movement to the street.
The elevator for the five-story project, as you can see in the video above, was set in no time. Quite impressive even for veteran project managers. “Seeing a fully installed elevator lowered into place and set in four hours was amazing.” – Luis Cadiz, Project Manager, C.W. Driver.
The process begins with placing the mode of conveyance, an in-ground hydraulic jack. It goes in first. Then the lower a portion of the fully installed elevator and hoistway gets craned into place. Once it is set, the second section of the elevator is lowered as well and locked in. The elevator came in two sections due to transportation needs and is not unusual in the least. The units are designed to be stackable.
The entire elevator set took less than four hours and everything is already inside including the elevator car and wiring. Once power is available onsite the MEM Elevator System is ready to go. It will then be started up, adjusted and scheduled for inspection. An easy, fast, timesaving solution. The elevator is off the critical path and the all too important purpose of the building can begin changing lives sooner than if a traditional elevator was used.
TL Shield & Associates set the elevator and will be in charge of start up as well. They and Modular Elevator Manufacturing was chosen due to the expertise they provide and the superior product they offer. They have been the leaders in the modular elevator field for more than two decades.
Tough steel makes up the MEM Elevator System hoistway with production occurring in a factory environment. Installation of all the elevator components and parts then takes place. Loading and shipping occurs next when the site is ready. In four hours you will have a fully installed, commercial quality elevator ready to be started up and used.
The mission of this project is important. The elevator and the Hope on Hyde Park project are crucial to combat the growing homelessness issues in Los Angeles. There are several benefits for supportive housing with the MEM system:
In conclusion, it maybe time to explore the possibilities further regarding supportive housing elevators. Let’s see if the MEM Elevator System can meet your needs. You can click the button below for a Fast Track Quote for a project you currently are working on. However, if you want to explore it more, request a LIVE VIRTUAL TOUR. We would be happy to pull back the curtain. We will show you how we produce the industry’s most successful modular elevator solution.
There are distinct advantages to the use of modular elevators for parking structures. This is especially true when adding the MEM Elevator System to you next project. Conversely, adding a conventional elevator to a new or existing parking facility can cost hundreds of thousands of dollars. Beyond that the process can take months. The MEM Elevator System is an architectural solution, which effectively deals with these issues, saving you time and money. Those are distinct advantages of the modular elevator and set us apart from other alternatives.
The MEM Elevator System, is a prefabricated the hoistway which is manufactured off-site in a remote location. This allows the modular elevator to be manufactured in the plant simultaneously to the construction of the parking structure.
Unlike conventional elevators, modular elevators don’t need to be an inherent part of the parking structure they are servicing. Instead, they are easily attached to the existing structure. This often is on the exterior of the building without having to share the same foundation.
For an existing parking structure that is adding floors and needs a vertical transportation system, a modular elevator is the ideal solution. It extends the life of the parking facility when adding a modular elevator. You will lose no square footage – all while ensuring accessibility for everyone.
Also, placing the modular elevator on-site before the parking facility is fully built is possible. It can even can be used as the construction elevator – as long as power is available.
See, regulators typically require a temporary construction lift for projects over three stories. The alternative is an elevator to be installed at a job site. A permanent modular elevator can be used to meet these requirements. It then eliminates the need to rent and expense a temporary lift. That in itself demonstrates distinct advantages of the modular elevator.
Additionally, modular construction offers shorter build times; typically 50 to 60 percent less than a traditional on-site construction project. A modular elevator can be up and running before a conventional hoistway is built. This provides an earlier return on investment and lower professional fees.
The two most common vertical transportation solutions used in parking facilities are hydraulic and traction machine roomless (MRL) elevators. Both are available full-sized for commercial use and both are equal in performance and quality.
Hydraulic has the advantage of being easier to install and maintain. This makes them a less expensive choice in the long run. As a result hydro elevators are the recommendation we most often make. They are in use in parking structures between two-to-five stories and are available with holeless-twin or in-ground jacks. Holeless hydraulic elevators use above-ground cylinders and are used in sustainable or cost-sensitive projects with two to three floors. With the holeless elevators you can eliminate the unknowns related to drilling for in-ground jacks.
The in-ground hydraulic system can easily accommodate five stories or even higher. It provides a smooth ride and lower maintenance costs overall.
The traction MRL is an option, that offers little more than the hydraulic units. It is marginally faster (literally seconds) and can achieve higher total travel. However, the additional speed comes with a cost of higher maintenance fees.
It is important for the contractor to work closely with the modular elevator manufacturer. They should be involved when planning and installing a modular elevator for a successful installation. Logistics and timing play an important role in maximizing the financial opportunities that modular elevators afford. The MEM team offers support, coordination and communication in the process.
The first step in the installation process is pouring the concrete elevator pit. The anchor bolt template from MEM is useful for precise positioning. Second, once the elevator is set in place, it is attached to the anchor bolts and verified to be plumb. You now have a fully installed elevator.
Next, the fully-assembled modular equipment room is set into place. This installation process is usually completed by lunch time. No kidding.
After the elevator is set, electrical, fire and phone services are provided and final adjustments are completed. Upon inspection and approval by the appropriate jurisdictions, the elevator is ready for use in a matter of days.
As you can see modular elevators offer many benefits over conventional elevators. For all low and mid-rise applications in new and retrofit construction we are the preferred solution.
Lastly, we can customize the ready-to-use MEM Elevator System. In that way we can meet the needs of any project. And the end results are indistinguishable from conventional construction. They are also available with vandal resistant features because we all know a parking garage elevator needs to be tough. One thing for sure there are distinct advantages of the modular elevator for the parking industry.
We hope we have laid out a good argument for the advantages of the modular elevator for parking structures. So if you have any interest contact us at any time. We will help you think though potential uses. If you have a project in mind, click the Fast Track button below. You will be provided a thumbnail number and receive additional information. If you would like to see how we create the elevator, you can register for a Live Virtual Tour. Or come visit our factory in person. We would love to show off a bit.
You learn a lot by listening. Like mom always said, we have two ears and just one mouth for a reason. So, last week at the World of Modular conference held by the Modular Building Institute we got a chance to listen.
We found out what people were thinking when it came to elevators from their perspective. How does the architect, engineer, project manager, owner or designer really feel about elevators and the elevator industry? And especially what do they think of modular elevators.
Well let’s be blunt, we did not hear many positive things about the elevator business as a whole. Some folks actually joked we were the most hated industry at the conference! Wow tough crowd. But I can see why.
See in simplest terms people in the construction industry know an elevator is just a box moving up and down inside another box. You have a cab, a hoistway or shaft, doors, a control system and a means of conveyance. Pretty simple. But, when it comes to making all of the intricate pieces of the puzzle to work together in a project, that is the hard part. And thankfully that is our specialty with experience and knowledge with decades in both the elevator and construction industry.
Unfortunately, though many have been led to believe (by elevator folks) that the elevators are the difficult part of the equation. Couple that with a reputation for unresponsiveness and you have a recipe for agitation and mistrust. Hence the negative comments about the elevator industry.
Overall we got much higher marks for the MEM Elevator System and innovation, flexibility and responsiveness. Those we spoke to realize we are different from others in the elevator business and that even high-quality modular elevators are relatively easy…it is the project integration that is complex and that is where we have an opportunity to shine.
So why are things seemingly so cloudy and murky in the elevator end of the business? Why all the hate? There are several reasons and believe it or not it often earned and not all an evil plot (just some of it is).
The Modular Elevator Manufacturing Elevator System is different. When you are talking to someone about an elevator at MEM, you are talking to the project manager. Your elevator is not going to be passed around like a hot potato. Also, from the outset your elevator and your project are combined. That means one person is working on the details.
So the World of Modular conference presented by the Modular Building Institute was a learning and listening experience. We hope that we were able to hear what you were saying and you see us as your elevator solution. MEM is doing things differently and is starting an elevator revolution where easy, fast installs are the norm and all the details worked out ahead of time. Is it time for you to join the revolution? It is never too late.
As you make your elevator choice remember the MEM System is perfect for any low or mid-rise application and it is very easy to set and start up as we take care of the heavy lifting.
The MEM System is commercial quality elevators installed when you need them in about four hours. They can be started up once we have power and can be used as a construction elevator. Also, they are not just for modular building. Any type of structure can utilize our elevators as a way to get quality installed quickly and off the critical path.
It is time to change how things are done and seriously consider modular. The Modular Building Institute is a great resource if you have questions in general. Or if you would like more information about us specifically and how we can ease some of your elevator pain points feel free to contact us. If you have a project in mind, to get the ball rolling just click the Fast Track Quote button below. You can also see how we produce our elevators with a Live Virtual Tour of our facility. We would love to show off a bit so sign up today.
The most difficult environment for an elevator is a parking garage making one tough elevator essential. Exposure to the elements as well as being way from the main building or in a remote location is often problematic.
Even with surveillance systems some feel there are no prying eyes watching them come and go. Also, the riders are usually not limited to a specific known clientele like in other elevator settings. Most anyone can pick up a ticket to park and go in or even just wander in off the street. Depending on the time of day the elevator can be left isolated and vulnerable. All of this makes for difficult operating conditions including heat and cold, wind and rain as well as an opportunity for vandalism.
The result is a parking garage becomes a true test for elevator durability. Much like the old Timex commercials from the 50’s and 60’s. John Cameron Swayze in his smooth voice would say, “Let’s see what happens when…” And then they would strap a watch to Rocky Marciano’s wrist or Mickey Mantles bat. After taking the pounding it would work like new and Swayze would proclaim it “Takes a licking and keep on ticking.” You need an elevator that tough.
It all starts with design. A tough commercial quality elevator for any parking structure has to be durable first. This is the thinking behind the MEM Elevator System for Parking Structures such as the Bellflower Project as seen below. First and foremost our parking structure elevators begin with a rugged hoistway or shaft welded together from tube steel. They pass inspection in any Seismic or hurricane zone. Then comes the solid steel sling and strong Galvaneal steel elevator cab. All are designed for heavy commercial use. Why? We know what the elements can do and anticipate high passenger traffic. So the unit is engineered to take a bruising in all circumstances a parking garage elevator has to take.
It is also engineered to look great regardless of the building design. Once the fully installed elevator is in place (in less than four hours), nearly any exterior cladding can be applied to match the architects plans for the rest of the project. Just because it has to be one tough elevator, doesn’t mean that it is not flexible in the look. It is then started up in a week and ready to be inspected and used. Our system is so fast in placement and start up it can also be used as a construction elevator.
Additionally, our parking structure design includes special accessories. Vandal resistant features are a must. This includes the control panel and elevator buttons that are created specifically for difficult environments. They are not plastic and easily broken. The overall cab finish can also be designed to be cleaned and buffed like in the above photos. This will help remove graffiti and to stand up to rough treatment. A wood core elevator cab is never a solution for this kind of environment. They use just a thin metal laminate to cover the particle board. They cannot take the demands of cleaning. Also, if the wood core gets wet you know the results. Swelling, chipping, warping and the laminate glue comes loose.
The MEM Elevator System for Parking Structures comes with a ceiling with recessed lights designed to withstand harsh treatment as well. They can also be replaceable if need be. All exterior hoistway finishes on doors and frames are flat, paintable and easily cleaned. The hall calls are in the frame of the door, making them tamper resistant, tough and vandal resistant as well. NEMA-4 Type wiring enclosures can also used to protect the elevator workings against weather conditions.
We have a well thought out approach when it comes to durability. That is due to our decades of experience in the elevator industry in both service and manufacturing. We know the challenges so you benefit from our years of knowledge. Bottom line, we know what it takes to design and build one tough elevator. But beyond that, we deliver it when you need it on the jobsite as a fully installed unit. Here are some videos showing how easy it is.
So, for your next project it maybe time to explore the possibilities of the MEM Elevator System for Parking Structures. See how our experience regarding elevators and parking structures can be a perfect fit. You can click the button below for a Fast Track Quote for a project you currently are working on. However, if you want to explore it more, request a LIVE VIRTUAL TOUR. We would be happy to pull back the curtain and show you how we produce the industry’s most successful modular elevator solution.