Modular elevators are a great solution for modular construction projects, but often for an overlooked reason. The obvious list of benefits includes: quality factory manufacturing, less congestion on the jobsite, and the crane is already a part of the project so there is additional convenience. Although those positives are real and are a great benefit there is another factor that makes our elevators the perfect choice for any modular project.
Modular projects come in many different forms when it come to vertical transportation. Some place units around the planned hoistway. You see this most often with the inclusion of a traditional elevator in the project. In that type of construction a hoistway and pit is poured or constructed early in the build. Units are then placed to surround the hoistway.
When permanent power is supplied, the elevator is installed in the hoistway one piece at a time by an elevator crew. This process is slow, interferes with other trades onsite, and puts the builder at the mercy of the elevator mechanic. A modular elevator is better due to its flexibility.
If you chose to go with the MEM System there is no real need for a massive redesign of the entire project. All you have to do is pour a pit to our dimensions and leave a hole for the modular elevator to slip inside the building where the hoistway would have been built. Below, is a short video that shows the space left for duplexed elevators. It is then just a matter of easy insertion.
You can also see in the video that the MEM Elevator System is capable of more than just low-rise. Shipped in approximate fifty foot sections, we can provide solutions for modular projects up to seven stories, depending on total travel.
Another way to include the MEM Elevator System into your modular project is to start with setting the modular elevator first thing. Depending on the hoistway height, modular elevators are self-supporting structures. The elevator is simply put in place. Then modules go around the unit. Its just that easy.
If it is a tall enough project to require two sections, the MEM Elevator System can go in the queue with all your other modules. You set the lower section first and then set modules around the hoistway. Then place the second section of the modular elevator once you get to that level. We just need to understand your timing in advance.
Because of the flexibility build into the MEM Elevator System they are applicable in nearly any type of construction for any type of buildings. Our elevators and large enough to accommodate medical facilities to small commercial quality solutions for ADA regulations.
This is especially true for modular projects.
Regardless of the general plan, we will be with you to give support in the process and will meet with you to make sure there is a clear understanding of any requirements. Just know that when you choose the MEM Elevator System you are getting a faster solution that reduces project interference. The units are always high-quality and there is always a team standing with you during the project.
If you would like more information regarding the MEM Elevator System for use in one of your projects please click the button below to request a Fast Track Quote. Also, you can request a factory tour to get a better perspective on the revolutionary MEM Elevator System.
MEM Gains Approval Across the US – Los Angeles, CA. – Last month Modular Elevator Manufacturing made big news regarding HCD approval in California. It gained official approval for models of their MEM Elevator System in the state. But, now MEM continues to break news in the elevator and modular industry as well by adding projects in Connecticut, Illinois, Detroit – Michigan, Indiana, and Georgia this quarter.
The MEM Elevator System is a complete commercial quality elevator. It is a hoistway or shaft produced in a factory out of tough 4X4 inch steel, wrapped in drywall. Inside it contains all the elevator components pre-installed in the manufacturing facility. This includes the doors, wiring, the elevator cab, and all the buttons or hall calls. It arrives on a truck and put in place in a matter of a couple hours. When given power it is started up in less than a week.
First, MEM has produced and placed well over 100 elevators in several states, mostly in California. As MEM continues to expand and grow, jurisdictions once closed have become open to us. Along with the traction elevator approval this means more opportunities for inclusion in nearly all jurisdictions across the US.
“This is a gamechanger.” According to David Torres, National Sales Manager. “National acceptance, recognition from HCD in California, and approval to place units in Illinois, Michigan and other locations expands our opportunities. But it also expands the possibilities of a better elevator system in most states and cities across America.”
“This is a game changer!”
David Torres – MEM National Sales Manager
Torres went on to say that with the national housing shortage, modular elevators can speed any type of project to a faster completion. Many of the ponderous steps involved with onsite installation are removed as the installation is moved to a factory setting.
The California Department of Housing and Community Development gave its approval for the MEM Elevator System HW2 – 3500 product earlier this month and it will be a game changer for the elevator and construction industry. The California HCD is the state agency responsible for overseeing the planning, development, and preservation of affordable housing, as well as managing various housing-related programs and policies in California. The HCD works on initiatives to provide safe, affordable housing for residents, promote sustainable community development, and address homelessness. They also support local governments with housing policy, zoning regulations, and funding for housing projects.
This is a game changer for Modular Elevator Manufacturing (MEM) to be approved by the HCD. It ensures that the elevators meet strict safety, building, and accessibility codes required by the state. This approval ensures that the elevators are compliant with California’s standards, particularly for modular homes and structures that often need specialized installations. Plus this speeds up the approval process by weeks if not months, significantly closing the time from concept to installation.
Here are a few key reasons why approval from HCD is so important:
This breakthrough in approval means that the MEM Elevator System structure no longer has to go through the local jurisdictional inspection process. In short, the approval by HCD is necessary for ensuring that MEM elevators are safe, compliant, and ready for use in California’s modular construction projects.
Although this is great news for Modular Elevator Manufacturing there are some restrictions that need to be explained. The designation is not on all MEM products. It is for only the HW2 – 3500. This is the best selling commercial modular elevator in California. But depending on your project it may have to go through the normal approval process.
The designation is also only for modular housing projects in California. Although, MEM distributes nationwide to a wide variety of vertical markets including, apartment complexes, commercial structures, school, colleges and universities, stadiums, hotels, medical facilities, and other types of industries, the HCD designation does not apply.
The building tie-ins are not a part of the HCD approval and must still undergo approval by the proper authorities.
It is however to good to know that the HCD has recognized the MEM Elevator System.
Finally, the construction industry will have an approved alternative to traditional elevators that slow the construction process. There is no more waiting on the elevator for projects that can use the HCD designation. As a result on these projects the elevator company will no longer get in the way and control the jobsite. Also, it speeds up the approval process by weeks if not months, significantly closing the time from concept to installation.
On a side note, the HCD designation is important for other reasons. It shows that the Modular Elevator Manufacturing process and approved products are of the highest quality. Also, they can meet stringent approval processes in most any jurisdiction. This has been seen in the many approved projects. Even in some jurisdictions that were thought to have been off limits in the past.
So, whether you are in California or any other state in the union you can be confident that the modular elevator you are purchasing is high-quality. They are even a high enough quality for approval in earthquake prone California.
If you would like more information regarding the MEM Elevator System for use in one of your projects please click the button below to request a Fast Track Quote. Also, you can request a factory tour to get a better perspective on the revolutionary MEM Elevator System.
MEM Gains HDC Approval – Los Angeles, CA. Modular Elevator Manufacturing has now gained official approval for models of their MEM Elevator System in the state of California. The MEM Elevator System is a complete commercial quality elevator. It is a hoistway or shaft produced in a factory out of tough 4X4 inch steel, wrapped in drywall. Inside it contains all the elevator components pre-installed in the manufacturing facility. This includes the doors, wiring, the elevator cab, and all the buttons or hall calls. It arrives on a truck and put in place in a matter of a couple hours. When given power it is started up in less than a week.
The California Department of Housing and Community Development gave its approval for the MEM Elevator System HW2 – 3500 product earlier this month and it will be a game changer for the elevator and construction industry. The California HCD is the state agency responsible for overseeing the planning, development, and preservation of affordable housing, as well as managing various housing-related programs and policies in California. The HCD works on initiatives to provide safe, affordable housing for residents, promote sustainable community development, and address homelessness. They also support local governments with housing policy, zoning regulations, and funding for housing projects.
This is a game changer for Modular Elevator Manufacturing (MEM) to be approved by the HCD. It ensures that the elevators meet strict safety, building, and accessibility codes required by the state. This approval ensures that the elevators are compliant with California’s standards, particularly for modular homes and structures that often need specialized installations. Plus this speeds up the approval process by weeks if not months, significantly closing the time from concept to installation.
Here are a few key reasons why approval from HCD is so important:
This breakthrough in approval means that the MEM Elevator System structure no longer has to go through the local jurisdictional inspection process. In short, the approval by HCD is necessary for ensuring that MEM elevators are safe, compliant, and ready for use in California’s modular construction projects.
Although this is great news for Modular Elevator Manufacturing there are some restrictions that need to be explained. The designation is not on all MEM products. It is for only the HW2 – 3500. This is the best selling commercial modular elevator in California. But depending on your project it may have to go through the normal approval process.
The designation is also only for modular housing projects in California. Although, MEM distributes nationwide to a wide variety of vertical markets including, apartment complexes, commercial structures, school, colleges and universities, stadiums, hotels, medical facilities, and other types of industries, the HCD designation does not apply.
The building tie-ins are not a part of the HCD approval and must still undergo approval by the proper authorities.
It is however to good to know that the HCD has recognized the MEM Elevator System.
Finally, the construction industry will have an approved alternative to traditional elevators that slow the construction process. There is no more waiting on the elevator for projects that can use the HCD designation. As a result on these projects the elevator company will no longer get in the way and control the jobsite. Also, it speeds up the approval process by weeks if not months, significantly closing the time from concept to installation.
On a side note, the HCD designation is important for other reasons. It shows that the Modular Elevator Manufacturing process and approved products are of the highest quality. Also, they can meet stringent approval processes in most any jurisdiction. Even some that were thought to have been off limits in the past.
So, whether you are in California or any other state in the union you can be confident that the modular elevator you are purchasing is high-quality. They are even a high enough quality for approval in earthquake prone California.
If you would like more information regarding the MEM Elevator System for use in one of your projects please click the button below to request a Fast Track Quote. Also, you can request a factory tour to get a better perspective on the revolutionary MEM Elevator System.